Mills & Crushers

Screening Machines

Mixer, Granulators and Colour Machines

Transport System

Dryers

Iron Removal & Metal Detectors

Weighing System

Extraction & Dosing

Control Instruments

Spare Parts & Regenerations

PEG IMPACT MILLS

Designed for long working life and maximum reliability, the Peg Impact Mill DC 2B consists principally of a body in cast iron with separate panels, one of which is hinged to facilitate inspection and renewal of the peg rotor.

The drive and rotor support shafts are mounted on permanent oil bath lubricated, self-adjusting radial roller bearings, in supports complete with cover and special labyrinth seals.
The electric motor for the rotor on the hinge side is secured on a mounting plate specially designed to accomodate it and hinged at lower part of cast iron base of the mill.
The second motor, which drives the rotor on the loading side, is secured to the floor by means of a sliding mounting plate.
Drive is transmitted from the machine to the counter-rotating rotors by means of 2 V Belts.

Loading side power (kW)	Motor Power (kW)	RPM	Max rotor Ǿ (mm)	Max rotor width (mm)	Weight (Kg)
11 - 22	15 - 30	1470	950	250	2000

 

The data shown is indicative and may vary without notice